aFe 54-13064D Magnum FORCE Stage-2 Cold Air Intake Pro DRY S | 2021-2025 Ford F-150 5.0L V8

Overview

The aFe POWER Magnum FORCE Stage-2 Cold Air Intake System (Part #54-13064D) is a premium, bolt-on performance upgrade engineered specifically for the 2021–2025 Ford F-150 with the 5.0L V8 Coyote engine. Designed for F-150 owners who demand measurable horsepower and torque gains without sacrificing daily drivability, this open-element cold air intake system replaces the restrictive factory airbox with a dyno-tuned, high-flow assembly that delivers both aggressive induction sound and proven power. If you're searching for the best cold air intake for your 2021+ Ford F-150 5.0L V8, the aFe Magnum FORCE Stage-2 is a top-tier solution backed by real dyno data.

Key Features & Benefits

• Dyno-Proven +16 HP & +17 lb-ft TQ – Real, measurable power gains verified on aFe's in-house DynoJet dynamometer — not estimated figures.
• 66% Greater Airflow Over Stock – Outflows the factory intake by 66% with a measured flow rate of 580 CFM @ 7" H₂O, dramatically reducing intake restriction for improved throttle response and acceleration.
• Pro DRY S Three-Layer Synthetic Filter – Oil-free, 9" tall, 360-degree radial flow filter with a 5-1/2" flange and three layers of progressively finer synthetic media. Achieves 99.2% filter efficiency while requiring zero oil during maintenance — ideal for street use and dry/dusty climates.
• Inverted Filter Top for Extended Service Intervals – The inverted top design increases usable filter surface area, meaning longer intervals between cleanings compared to conventional filter designs.
• XLPE Open-Element Housing – The massive air filter is surrounded by a one-piece, open-element cross-linked polyethylene (XLPE) polymer housing that is heat soak resistant, extremely durable, and minimizes warm engine air ingestion for maximum charge density.
• Built-In Cold Air Intake Scoop – The housing features a dedicated built-in air intake scoop that captures cold, dense air directly from the top of the radiator support — the coolest available air source in the engine bay.
• Computer-Designed, Dyno-Tuned Intake Tube – High-quality intake tube engineered via CAD and validated on the dyno to achieve peak power gains while maintaining a perfect, rattle-free fit.
• Aggressive Induction Sound – Open-element design delivers a pronounced, sporty intake growl under hard acceleration that complements the F-150 5.0L V8's character.
• Washable & Reusable Filter – Never buy a disposable air filter again. The Pro DRY S filter is fully washable and reusable for the life of the vehicle, saving money over time.
• No Cutting or Drilling Required – Innovative filter-to-housing interface and use of OE mounting locations make this a true bolt-on installation with no permanent modifications to the vehicle.
• Premium Hardware Included – Stainless-steel clamps provide corrosion-resistant strength, and a premium silicone coupling ensures a secure, leak-free seal at the throttle body connection.

What's Included

• aFe POWER Magnum FORCE Stage-2 XLPE open-element intake housing with built-in cold air scoop
• aFe Pro DRY S 9" tall, 360-degree radial flow conical air filter (5-1/2" flange)
• Computer-designed, dyno-tuned XLPE intake tube
• Silicone coupling (throttle body connection)
• Stainless-steel clamps
• All required hardware for bolt-on installation
• aFe POWER installation instructions

Specifications

Manufacturer Part Number	54-13064D
Brand	aFe POWER (Advanced Flow Engineering)
UPC	00802959546420
Filter Type	Pro DRY S (Oil-Free, 3-Layer Synthetic Media)
Filter Height	9 inches
Filter Flange Diameter	5-1/2 inches
Filter Design	360-Degree Radial Flow, Inverted Top
Filter Efficiency	99.2%
Housing Material	XLPE (Cross-Linked Polyethylene) Polymer
Housing Style	Open-Element with Built-In Cold Air Scoop
Measured Flow	580 CFM @ 7" H₂O
Flow Improvement vs. Stock	+66%
Dyno-Proven Power Gain	Up to +16 HP / +17 lb-ft TQ
Hardware	Stainless-Steel Clamps, Premium Silicone Coupling
CARB / Emissions Compliance	NOT CARB Legal — Not for sale or use in California or states adopting CA emissions standards
Filter Maintenance	Washable & Reusable (No Oil Required)
Warranty	aFe POWER Limited Lifetime Warranty

Fitment & Compatibility

This cold air intake system is a direct-fit replacement engineered exclusively for the following vehicles:

• 2021–2025 Ford F-150 – V8-5.0L Coyote (All Cab Configurations)

Note: Verify your engine code before ordering. This kit is designed for the Gen 3 5.0L Coyote V8 found in the 14th-generation F-150 (2021+). It is NOT compatible with EcoBoost 4-cylinder or V6 variants, nor with previous-generation F-150 models. Does not fit the F-150 Raptor or Lightning variants.

⚠️ Emissions Notice: This product is NOT legal for sale or use in California or any state that has adopted California emissions regulations (including but not limited to: CO, ME, MA, NY, OR, VT, WA). For California residents, see www.p65warnings.ca.gov. Always verify local compliance requirements before purchasing.

Installation

The aFe Magnum FORCE Stage-2 is a direct bolt-on installation designed to be completed in approximately 30 minutes using basic hand tools. No cutting, drilling, or permanent modification to OEM components is required. The system utilizes the vehicle's factory mounting locations and OE air inlet, minimizing the number of components needed and ensuring a perfect, rattle-free fit. The innovative filter-to-housing interface simplifies assembly, and all clamps, couplings, and hardware are included. This is a beginner-friendly install suitable for the home garage.

Frequently Asked Questions

Is the aFe 54-13064D CARB compliant? No — this intake is not CARB legal and is not approved for sale or use in California or states adopting California emission standards.

Does the Pro DRY S filter require oil? No — the Pro DRY S filter is 100% oil-free. It requires no oil during cleaning or re-installation, making it ideal for high-dust environments where oiled filters can become prematurely clogged.

Is the filter washable? Yes — the Pro DRY S filter is fully washable and reusable, designed to last the lifetime of the vehicle.

Will this void my Ford factory warranty? The Magnuson-Moss Warranty Act generally protects consumers from blanket warranty voids due to aftermarket parts. However, consult your dealership regarding your specific situation.

How much power can I expect to gain? aFe's dyno testing on the 2021+ F-150 5.0L V8 has demonstrated gains of up to +16 HP and +17 lb-ft of torque over the stock intake system.